SEON HS
품목분류분류사례수출입요건법령·판례도구
분류사례
  • 분류사례
분류사례 > 상세
품목분류사례

Plywood of a thickness not less than 15mm, each ply not exceeding 6 mm thickness, With at least one outer ply of tropical wood ; 파일쿠션(Pile cushion) ; D500

품목번호4412.31-7090
구분품목분류사례
품목분류4과-10950 (시행일자: 2019-08-27)
품명Plywood of a thickness not less than 15mm, each ply not exceeding 6 mm thickness, With at least one outer ply of tropical wood ; 파일쿠션(Pile cushion) ; D500
결정기관관세평가분류원
문서번호0072019003618

이미지

품목분류4과-10950-1품목분류4과-10950-2Plywood of a thickness not less than 15mm, each ply not exceeding 6 mm thickness, With at least one outer ply of tropical wood ; 파일쿠션(Pile cushion) ; D500 이미지 3
Plywood of a thickness not less than 15mm, each ply not exceeding 6 mm thickness, With at least one outer ply of tropical wood ; 파일쿠션(Pile cushion) ; D500 이미지 4
Plywood of a thickness not less than 15mm, each ply not exceeding 6 mm thickness, With at least one outer ply of tropical wood ; 파일쿠션(Pile cushion) ; D500 이미지 5

물품설명

양쪽 외면 플라이가 열대산 목재(이 류의 국내주 제1호의 열대산 목재에는 해당되지 않음)인 목재시트(두께 : 약 0.2㎜)와 중심부 플라이가 아카시아, 포플러 혼합 목재시트(두께 : 약 1~2㎜)인 각 층(layer)을 나무결이 직각이 되도록 적층하여 만든 팔각형의 합판 ㅇ 규격(크기) : 약 400㎜ x 4...

결정이유

ㅇ 관세율표 제4412호에는 "합판·베니어패널과 이와 유사한 적층 목재"가 분류되며, 소호 제4412.3호에는 "그 밖의 합판[각 플라이(ply)가 6밀리미터 이하의 목재 시트(sheet)만으로 구성된 것으로 한정하며, 대나무로 만든 것은 제외한다]"을 세분류하고 있음 - 같은 호 해설서 제(1)항에는 "합판...

등록정보

2019-08-27

출처

관세청 CLIP 품목분류사례 원본 보기 · 문서번호 0072019003618
← 분류사례 목록