SEON HS
품목분류분류사례수출입요건법령·판례도구
분류사례
  • 분류사례
분류사례 > 상세
품목분류사례

Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200

품목번호8209.00-1010
구분품목분류사례
품목분류4과-8204 (시행일자: 2019-04-08)
품명Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200
결정기관관세평가분류원
문서번호0072019001348

이미지

품목분류4과-8204-1품목분류4과-8204-2Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200 이미지 3
Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200 이미지 4
Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200 이미지 5
Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200 이미지 6
Tips of tungsten carbide, treated with coating, for tool; i-One Drill Insert Blank; Y321H3200 이미지 7

물품설명

텅스텐 카바이드(Tungsten carbide)분말 90%와 코발트 분말 10%를 혼합하여 오각형 모양으로 성형, 소결한 서멧 재질의 인서트 드릴(Insert drill) 제조용 반가공품(Blanks) 5개를 플라스틱 트레이에 포장한 것 - 용도 : 절삭 날 가공과 보호막 코팅 후 홀더(Holder)에 장착되...

결정이유

ㅇ 관세율표의 해석에 관한 통칙 제2호 가목에서는 '불완전 또는 미완성의 물품이 제시된 상태에서 완전 또는 완성된 물품의 본질적인 특성을 지니고 있으면 완전 또는 완성된 물품으로 간주'하도록 규정하고 있으며, - 같은 통칙 해설서 (II) 항목에서는 “완성된 물품 또는 부분품의 대체적인 형상 또는 윤곽을 갖추...

등록정보

2019-04-08

출처

관세청 CLIP 품목분류사례 원본 보기 · 문서번호 0072019001348
← 분류사례 목록